Need help?Do you have a question about the Econar GeoSource 2000 GV361 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | GeoSource 2000 GV361 |
| Heating Capacity | 36, 000 BTU/h |
| COP | 3.6 |
| Refrigerant | R-410A |
| Power Supply | 208-230V/1Ph/60Hz |
Summarizes the controller's roles in managing unit operations, including blower, compressor, and diagnostics.
Details causes and troubleshooting for compressor lockouts to protect the unit from faults.
Lists potential causes and solutions when the entire unit fails to operate, checking power and wiring.
Addresses issues where the blower operates but the compressor does not, or cycles frequently, checking controls.
Covers problems related to inadequate cooling or heating performance, checking airflow and refrigerant.
Details issues preventing the unit from operating in heating mode, checking reversing valve and controls.
Addresses problems that prevent the unit from operating in cooling mode, checking reversing valve and controls.
Explains why the evaporator coil may freeze and how to resolve it, checking airflow and temperature.
Lists possible causes for lockouts during heating mode operation, focusing on pressure switches.
To Next Page