Need help?Do you have a question about the Econar GeoSource Vara 2 Plus and is the answer not in the manual?
Highlights unique features like two-step compressor, variable speed ECM blower, and electric resistance elements.
Explains the two-step compressor's part-load and full-load operation for efficiency and comfort.
Describes the variable speed ECM blower motor and its modulation for comfort and efficiency.
Discusses the use of R-410a refrigerant and its environmental friendliness.
Explains recirculating water/antifreeze solution through underground piping for heat exchange.
Describes systems using well water discharged after use, requiring specific well capacity.
Discusses issues like scaling and buildup, and methods for cleaning the water coil.
Provides step-by-step instructions for cleaning the water coil using a freeze method.
Outlines the procedure for cleaning the water coil using chlorine bleach for bacterial growth.
Explains how loop type and water temperatures affect heat pump capacity and requirements.
Highlights the importance of accurate space load estimation for HVAC installation success.
Describes the internal 24-volt transformer and its VA usage for control features.
Introduces the 3-heat/2-cool thermostat and its role in controlling system operation stages.
Explains the controller's functions like blower control, compressor operation, and system diagnostics.
Details how the thermostat signals control the blower speed for different heating/cooling stages.
Explains causes and effects of compressor lockouts due to safety switches opening.
Mentions the controller's diagnostic LED lights indicating system status.
Guides on cleaning/replacing the electrostatic air filter and its impact on system performance.
Explains the meaning of lockout indicator lights on the thermostat and initial checks.
Lists essential inspection and cleaning tasks to perform before each heating/cooling season.
Describes the preferred method using a desuperheater tee for domestic hot water heating.
Details an alternative method of connecting to the cold water supply line for hot water heating.
Outlines conditions and restrictions that apply to the warranty coverage.
Details the owner's obligations for maintaining warranty coverage and proper use.
To Next Page
General