Need help?Do you have a question about the Econar GeoSource Vara GV Series and is the answer not in the manual?
Details on closed loop systems, pipe types, and sizing.
Information on open loop systems, well requirements, and components.
Explains the function and installation of the freeze protection switch.
Step-by-step guide for cleaning scale and particle buildup.
Method for cleaning bacterial growth using chlorine bleach.
How loop configuration affects water temperatures and unit capacity.
Details on closed loop system design, EWT, and capacity selection.
Discusses well water temperature effects on unit capacity.
Importance of accurate load estimation for HVAC installation.
Information on the internal 24-volt transformer and its usage.
Requirements and basic operation of the recommended thermostat.
Functions of the unit's controller in managing operations.
How the controller manages blower speed based on thermostat calls.
How the earth loop pump is activated by the controller.
How the controller manages compressor startup and operation.
How the controller operates the 4-way reversing valve for cooling.
Causes and indications of compressor lockouts.
Delay periods to protect the compressor from short cycling.
Explanation of diagnostic LED lights on the controller.
Function of the optional overflow detection sensor.
Instructions for cleaning and maintaining the air filter.
Interpreting lockout lights on the thermostat and troubleshooting.
Steps for inspecting and cleaning components before each season.
To Next Page
General