To Next PageTo Next Page
Need help?Do you have a question about the Ecoray ORANGE 1040HF and is the answer not in the manual?
Lists standards and regulations the unit adheres to for safety and EMC compliance.
Provides contact details for the manufacturer and authorized representative for inquiries.
Outlines the terms and conditions of the product's warranty coverage and claim process.
Details essential precautions and warnings for safe operation and handling of the equipment.
Provides information and cautions regarding radiation safety during use of the X-ray unit.
Emphasizes important warnings to prevent serious damage, injury, or equipment malfunction.
Explains the meaning and location of various warning labels affixed to the equipment.
Describes various labels on the unit and their informative content for identification.
Specifies the intended use of the X-ray unit, primarily for veterinary diagnostics.
Advises users to understand manual instructions for safe operation and notes user responsibility.
Explains the meaning and application of symbols and terms used throughout the manual.
Lists the main and additional product names for clarity and identification.
Addresses potential interference with other devices and suggests mitigation methods.
Provides instructions and cautions for safely cleaning the diagnostic X-ray unit.
Specifies the recommended environmental conditions for unit operation and storage.
Lists and describes the various accessories and components included with the X-ray unit.
Displays the physical dimensions and weight of the X-ray unit for planning.
Identifies and labels the main parts and connectors of the diagnostic X-ray unit.
Explains the information contained on the unit's primary identification label.
Details the function of each indicator, button, and display on the operation panel.
Lists the comprehensive technical specifications of the diagnostic X-ray unit.
Provides detailed specifications and outline dimensions for the X-ray tube.
Details the necessary power source, voltage, and frequency for unit operation.
Guides users through the correct procedures for collimation and making exposures.
Outlines essential steps to verify the unit's functions and readiness before use.
Explains how to set up, store, and change Anatomical Programming Radiography (APR) modes.
Provides detailed, step-by-step instructions for successfully performing X-ray exposures.
Lists common error codes and their corresponding corrective actions for problem resolution.
Offers recommended exposure settings (kV/mAs) for various small animal anatomical regions.
Defines designated safe zones of occupancy to minimize radiation exposure during use.
Details the step-by-step process required for calibrating the X-ray unit's performance.
Presents data and methods for checking the consistency and accuracy of X-ray output.
Provides clear instructions on how to safely replace the unit's internal lamp.
Details the step-by-step process for safely replacing the fuses within the X-ray unit.
Instructions for properly connecting the hand switch to its designated socket.
Steps for correctly connecting the power cable and plug to the unit's power inlet.
Instructions on how to securely attach the X-ray unit to its operational stand.
Illustrates the overall architectural connections between the unit's main functional components.
Presents the detailed electronic circuit schematic for the unit's power supply board.
Shows the detailed electronic circuit schematic for the unit's power drive board.
Provides the detailed electronic circuit schematic for the unit's central processing unit (CPU) board.
Displays the detailed electronic circuit schematic for the EP Feedback (EP_FB) board.
Shows the detailed electronic circuit schematic for the IP Feedback (IP_FB) board.
General| Brand | Ecoray |
|---|---|
| Model | ORANGE 1040HF |
| Category | Medical Equipment |
| Language | English |
