To Next PageTo Next Page
Need help?Do you have a question about the Ecoray ULTRA 90BT and is the answer not in the manual?
Lists standards and associated equipment the unit complies with.
Details warranty terms, conditions, and how to request service.
Outlines general safety precautions for operating the unit.
Provides crucial safety guidelines regarding radiation exposure.
Explains the functions and indicators of the operation panel.
Lists technical specifications of the X-ray unit, including classification and output.
Details the specifications and outline dimensions of the X-ray tube.
Describes power source details and technique selection methods (manual/APR).
Provides instructions for collimation practices and general operation.
Details steps for performing a normal operation check and warm-up.
Explains the Anatomical Programming Radiography (APR) mode and its settings.
Guides on how to perform X-ray exposures, including hand switch operation.
Lists error codes and their corresponding corrective actions for troubleshooting.
Explains how to access and configure user-defined modes for personalized settings.
Describes the procedure for calibrating kV and mA values for accuracy.
Details the step-by-step process for safely replacing the battery pack.
Guides on how to replace a blown fuse in the equipment to restore operation.
Details the steps for replacing the collimator LED lamp due to damage or failure.
Illustrates the overall system architecture and component connections.
Provides the schematic diagram for the power and driver board.
Shows the schematic diagram of the main control board (CPU).
Displays the schematic for the EP_IP FB section of the main board.
General| Bluetooth | Yes |
|---|---|
| Type | Portable X-ray |
| X-ray Generator | High-frequency inverter |
| X-ray Tube Voltage | 40-90 kV |
| Charging Time | Approx. 4 hours |
| Usage | Veterinary |
