Need help?Do you have a question about the Ecostrad Fina-E and is the answer not in the manual?
Lists all the parts included in the installation kit, such as wall plugs, screws, and brackets.
Step-by-step instructions for securely attaching the towel rail to the wall using provided fixings.
The Ecostrad Fina-E is an electric towel rail designed for standalone use, pre-filled and adjusted at the factory, eliminating the need for additional filling. This ensures a sealed system, and users are cautioned against removing any seals to prevent leakages and voiding the warranty. The device is intended to provide warmth for towels and can contribute to the ambient temperature of a room, particularly in bathrooms or utility areas. Its operation relies on an integrated heating element, which, for basic and thermostatic models, comes pre-fitted. Smart models, however, require a professional electrician to install the element separately.
The primary function of the Ecostrad Fina-E electric towel rail is to heat and dry towels, offering a comfortable and hygienic solution for users. By warming towels, it enhances the user experience, especially in colder environments. The electric operation means it can be installed independently of a central heating system, providing flexibility in placement and usage. The heating element, crucial to its function, must always be located at the bottom of the rail to ensure proper heat distribution and efficient operation. Incorrect placement, such as at the top, is explicitly prohibited. The device is designed for permanent connection to a suitable electricity supply via a fused spur, adhering to IEE wiring regulations. For installations in bathrooms, the fused connection unit must be positioned out of reach of persons using the sink, shower, or bath, emphasizing safety in wet environments.
The Ecostrad Fina-E is designed for straightforward installation and use, though initial setup requires careful attention to safety and professional guidance where specified. Before installation, users must verify that the wall is strong enough to support the pre-filled towel rail's weight. For plasterboard walls, fixing to timbers is strongly recommended, and the supplied wall plugs are only suitable for solid walls, necessitating alternative fixings for other wall types. This highlights the importance of secure mounting to prevent accidents.
The installation process involves several steps:
Once physically installed, the electrical connection must be made by a qualified electrician, who should consult the element manual for detailed instructions and safety warnings. This ensures the device operates safely and efficiently. The towel rail is designed to get very hot, making it unsuitable for unsupervised use in locations where infirmed persons or young children may be present, underscoring a critical safety consideration. The voltage indicated on the rating label must correspond to the power outlet, and electrical safety is guaranteed only with a suitably earthed electricity supply.
Maintaining the Ecostrad Fina-E electric towel rail is relatively simple, focusing on regular cleaning to preserve its appearance and functionality. Regular cleaning with a soft cloth is recommended to keep the product surface looking new. For stubborn marks, soapy water can be used effectively. However, users are explicitly cautioned against using abrasive or chemical cleaners, as these can damage the surface finish over time. This guidance ensures the longevity of the product's aesthetic appeal and material integrity.
The device is designed for minimal internal maintenance, given its pre-filled and sealed nature. Users are strictly advised not to remove any seals, as this could lead to leakages and void the warranty. In case of damage to the supply cable, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards, emphasizing that internal electrical repairs are not user-serviceable.
The product comes with a comprehensive warranty: a 5-year guarantee on the steel body and a 3-year guarantee on paintwork, starting from the date of receipt. This warranty covers repairs or replacements for faults due to defects in materials or manufacturing. The warranty for electrical components is detailed in the element manual. It's important to note that the warranty is contingent on using the supplied heating element, operating at the specified supply voltage, and adhering to all conditions in the manual. Tampering with the towel warmer, adjusting fluid levels, or removing the ratings label will void the warranty. The warranty also excludes failures due to force majeure, accidental damage, mishandling, external impact, chemical agents, incorrect use, faulty electrical installations, or handling by unauthorized persons. Proof of purchase is required for any claim, and the warranty covers only the repair or replacement of the defective product, not installation costs or consequential losses.
Finally, the Ecostrad Fina-E is designed with end-of-life disposal in mind, marked with the crossed-out waste bin icon. This signifies that the equipment must not be disposed of with household waste. Users are directed to collection points for free return of waste electrical and electronic equipment, which can be located through local authorities. This commitment to separate collection facilitates re-use, recycling, and other forms of recovery, preventing negative environmental and health impacts from hazardous substances potentially contained within the equipment.
General| Type | Electric Panel Heater |
|---|---|
| Voltage | 230V |
| Frequency | 50Hz |
| Material | Steel |
| Mounting Type | Wall Mounted |
| Power Output | 1000W, 1500W, 2000W |
| Control Type | Digital Thermostat |
| Timer | Yes |
| Controls | Remote Control |
| Safety Features | Overheat Protection |
To Next Page
