Need help?Do you have a question about the Ecotech Marine QuietDrive and is the answer not in the manual?
General| Dimensions | Varies by model |
|---|---|
| Voltage | 24VDC |
| Hose Connection Size | Varies by model |
| Pipe Connection | Varies by model |
| Maximum Pressure | Varies by model |
| Weight | Varies by model |
Control your QuietDrive pumps from anywhere using EcoSmart Live via a web browser or iOS app.
Identifies buttons, indicators, ports, and dials on the QuietDrive driver.
Guides through initial setup and lists key technical specifications of the driver.
Illustrates the flow between different operational modes via buttons and dial.
Explains how to use Auto Tune to create custom wave forms.
Briefly introduces Feed, Battery Backup, and Night modes.
Operates the pump at a constant speed determined by the control dial position.
Simulates natural reef environments with varying flow patterns.
Creates uniform high/low pulses at intervals of 0.2 to 2 seconds.
Creates uniform clockwise/counterclockwise pulses at intervals of 2 seconds to 2 hours.
Utilizes Auto-Tune for easy wave form creation in your tank.
Cautionary advice regarding potential stress on aquarium tanks from wave generation.
Details on Feed, Battery Backup, and Night modes for specific operational needs.
Explains how to enter and navigate the configuration menu for six settings.
Details the six configurable settings and their color indicators.
Defines pump speed settings for battery backup mode.
Configures pump speed and duration for night mode.
Configures pump speed and duration for feed mode.
Sets the duration for the auto-dim functionality.
Explains how QuietDrive pumps can operate independently, as master, or as slaves.
Details slave pump operation modes: Sync (same as master) and Anti-Sync (inverse of master).
Steps to set up pump groups with one master and multiple slaves.
Procedure to reset a pump's memory to independent mode.
Process to put pumps into configuration mode for assignment.
Steps to designate a pump as the master pump.
Steps to designate pumps as slave pumps.
Procedure to reset the master after assignments are complete.
Allows individual control of maximum speed for slave pumps.
Procedure to revert slave pump speed to match the master's setting.
Orchestrates pumps for efficient flow and wave conditions using EcoSmart.
Slave modes based on pump positioning relative to the master pump.
Compatibility and limitations of QD drivers with EcoSmart or Wireless Wave Drivers.
Creates a harmonic balance of flow, from chaotic to calm with a detritus surge.
Uses wave and surge motion to move detritus out of the aquarium.
Step-by-step guide to upgrade QuietDrive driver firmware.
Identifies LED error codes and their corresponding issues.
Provides resolutions for various error codes like disconnect, overheat, stall, and upgrade errors.
To Next Page
