Need help?Do you have a question about the Ecotech Marine Vectra and is the answer not in the manual?
General| Dimensions | Varies by model |
|---|---|
| Max Head Pressure | 21.5 feet (Vectra M2), 28 feet (Vectra L2), 21.5 feet (Vectra X2) |
| Wattage | 130W (Vectra M2), 150W (Vectra L2), 200W (Vectra X2) |
| Inlet Fitting | 1.5 inch (Vectra M2), 2 inch (Vectra L2), 2 inch (Vectra X2) |
| Outlet Fitting | 1.25 inch (Vectra M2), 1.5 inch (Vectra L2), 1.5 inch (Vectra X2) |
| Model | Vectra M2 |
| Control | EcoSmart Live via Mobius |
Rotate the pump head by removing hex bolts to optimize plumbing configuration.
Steps for installing the QuickCouple connector using plumbing and ABS cement.
Select a location for the driver, emphasizing the use of a drip loop for safety.
Instructions for mounting the driver bracket and installing the driver using a screwdriver.
Crucial step to set the Vectra driver to the desired configuration before use.
Emphasizes selecting the correct configuration for modes, settings, and safety features.
Detailed procedure to switch between Return Pump and Closed Loop modes via driver controls.
Provides steps to diagnose issues and lists support resources like videos and community forums.
To Next Page
