EcoTrikes
Instructions on the use of the alarm
1. The first button is the Arm button, when
pressing one time gently, the horn will ring
one loud, after three seconds, the scooter will
be on alert. When touching the scooter firstly,
the horn will ring 3 times intermittent, if
touching the scooter secondly within 10
seconds, the horn will ring 15 seconds. If
forcing to move the scooter, the horn will ring
continuously.
2. The second button is the Disarm button.
Pressing this key one time gently, the horn
will ring two loud, then the alert is removed. It
also will shut the horn off if the alarm has
been activated
3. The third button is Start Button, it has no
function.
4. The fourth button is Find button, when
pressing this key one time gently, the horn will
ring three seconds and alerts us the scooter’s
location, pressing button 2 will stop horn.
When pressing this key two seconds, it will
become the state of sensitivity adjustment,
the horn will ring “Bi”“BiBi”“BiBiBi”
“BiBiBiBi”, then looping. The number of
consecutive chirping represents different
To Next Page