11
10
https://www.altonindustries.com
Product Maintenance and Care
*Please unplug the power supply, turn off the machine,
and remove the battery pack before maintenance and care.
1.Routine maintenance of dirty water tank: clean the dirty water tank and its shed immediately after each use,
avoiding to cause odor. Hold the dirty water tank handle by hand, press the lock buckle with thumb and pull the
dirty water tank out gently.
2.Routine maintenance of roller brush: please do the self-cleaning after each use. lf the roller brush is too dirty,
take out the roller brush according to the picture as below, and clean it by yourself.
Pull the roller brush buckle
3.HEPA daily maintenance: take out the HEPA from the dirty water tank as below, please place it in the air vent
to dry after cleaning.
Product Parameter
Model:WCVP02
Product dimensions(mm):1150*270*250
Working voltage(V):DC21.9V
Noise(dB):70dB
Rated power(W):150W
Adapter input:100-240V~50/60Hz 0.8A
Battery capacity(mAh):2600
Adapter output:DC 27V 0.8A
Cleaning water tank(ml):700
Charging time:4h
Dirty water tank(ml):500
Endurance:ECO mode 25min
Net weight(kg):3.9
Max mode 20min
*The above data are from our lab, actual usage may vary depending on the environment in which
it is used. Please refer to the actual use.
*Our company reserves the right to make any technical and design changes to the product due to
the continuous improvement of the product, and we reserve the rights to interpretation.
info@altonindustries.com
To Next Page
Loading...