6. Best Practices for Wireless
Communication
Note: To insure proper communication, place
the remote sensor on a flat surface. Do not lean
or upside down it to avoid any damage.
Keep the console several feet away from
computer monitors and TVs.
1)Indoor temperature and humidity
2)Every 60 second the unit will measure
indoor temperature and humidity.
3)PM 2.5 current and max value for
4)Every 10 minutes the unit will receive
5)Wireless Signal Strength Indicator
During the synchronization, it will reduce
one signal segment if it have not received
the signal once from the transmitter. It will
increase one signal segment if it has
received the signal once.
To Next Page
Loading...
Need help?
General