ECOWITT WH0290 Instruction Manual

Instruction Manual
5
2.3 Display Console Set Up
1. Move the remote about 2 to 3m away from
the display console (if the sensor is too
close, it may not be received by the display
console).
2. Remove the battery door on the back of the
display, as shown in Figure 2. Insert one AA
(alkaline, lithium or rechargeable) battery in
the back of the display console.
Figure 2
1. Integrated Hanging Hole
2. Tabletop Stand
3. °C/°F Button
4. MAX Button
5. Battery Compartment
6. Battery Compartment Cover

ECOWITT WH0290 Specifications

General

Brand	ECOWITT
Model	WH0290
Category	Monitor
Language	English