ECOWITT WH40 User Manual

1
Wireless Self-emptying Rain
Gauge Sensor
Model: WH40
Contents
1. Introduction ..................................................................3
2. Unpacking
.................................................................... 3
3. Features ........................................................................ 4
4. Setup Guide ..................................................................5
4.1 Site Survey
............................................................. 5
4.2 Rain Gauge Sensor Set Up and Installation .......... 6
4.2.1 Install rain gauge filter
....................................7
4.2.2 Install rain collector top ..................................8
4.2.3 Install Batteries in rain gauge sensor
..............9
5. Mounting ....................................................................10
6. Wi-Fi Configure with gateway
.................................. 14
6.1 Pair with Gateway ................................................14
6.2 Wi-Fi Connection for the Gateway
......................15
7. View Online Data on WS View Plus or Ecowitt App 15
8. Maintenance ...............................................................16
9. Specification
.............................................................. 17
10. Warranty Information .............................................. 18

ECOWITT WH40 Specifications

General

Brand	ECOWITT
Model	WH40
Category	Accessories
Language	English

Summary

Introduction

Unpacking

Features

Setup Guide

Site Survey

Perform a site survey before installing the sensor, considering height and obstructions.

Rain Gauge Sensor Set Up and Installation

Detailed instructions for setting up and installing the rain gauge sensor components.

Install rain gauge filter

Install the stainless steel filter to prevent leaves and debris from blocking the rain collector.

Install rain collector top

Securely attach the rain collector top to the sensor body to prevent detachment in wind.

Install Batteries in rain gauge sensor

Guide on how to properly insert batteries into the rain gauge sensor for power.

Mounting

Wi-Fi Configure with gateway

Pair with Gateway

Instructions on how to pair the rain sensor with the Wi-Fi Gateway for data transmission.

Wi-Fi Connection for the Gateway

Details on establishing the Wi-Fi connection for the gateway itself.

View Online Data on WS View Plus or Ecowitt App

Maintenance

Clean Rain Gauge

Steps for cleaning the rain gauge funnel and bucket every three months.

Replacing batteries regularly

Recommendations for replacing sensor batteries every 1-2 years for optimal performance.

Prevent snow build up

Advice on using anti-icing spray to prevent snow accumulation on the collector top.

Specification

Warranty Information