SAFETY PRECAUTIONS
COMMON ISSUES
If ANY of the following conditions occurs, turn o your unit
immediately!
The power cord is damaged or abnormally warm
You smell a burning odor
The unit emits loud or abnormal sounds
A power fuse blows or the circuit breaker frequently trips
Water or other objects fall into or out of the unit
DO NOT ATTEMPT TO FIX THESE YOURSELF! CONTACT AUTHORIZED
SERVICE PROVIDER IMMEDIATELY!
The following problems are not a malfunction and in most
situations will not require repairs.
READ THIS MANUALTROUBLESHOOTING
Issue Possible Causes
Unit does not turn on when pressing ON/OFF button
The Unit has a 3-minute protection feature that prevents the
unit from overloading. The unit cannot be restarted within three
minutes of being turned o.
The unit changes from COOL/HEAT mode to FAN mode
The unit may change its setting to prevent frost from forming
on the unit. Once the temperature increases, the unit will start
operating in the previously selected mode again.
The set temperature has been reached, at which point the unit
turns o the compressor. The unit will continue operating when
the temperature uctuates again.
The indoor unit emits white mist
In humid regions, a large temperature dierence between the
room’s air and the conditioned air can cause white mist.
Both the indoor and outdoor units emit white mist
When the unit restarts in HEAT mode after defrosting, white mist
may be emitted due to moisture generated from the defrosting
process.
To Next Page
Loading...
