SLEEP OPERATION
The SLEEP function is used to decrease energy use while you
sleep (and don’t need the same temperature settings to stay
comfortable). This function can only be activated via remote
control.
Press the SLEEP button when you are ready to go to sleep.
When in COOL mode, the unit will increase the temperature by
1°C (2°F) after 1 hour, and will increase an additional 1°C (2°F)
after another hour. When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour, and will decrease an
additional 1°C (2°F) after another hour.
It will hold the new temperature for 7 hours, then the unit will
turn o automatically.
The SLEEP function is not available in FAN or DRY mode.
NOTE
To Next Page
Loading...
