Ecox RG57A7/BGEF - Timer Operation; Setting the Auto-On Timer; Setting the Auto-Off Timer

12
REMOTE CONTROL
Mini Split Inverter
EDFM
TIMER OPERATION
Press the TIMER ON button to set the auto-on time of
the unit. And press the TIMER OFF button can set the
auto-o time of the unit.
To set the Auto-on time.
Press the TIMER ON button. The remote control
shows TIMER ON, the last Auto-on setting time and
the signal "H" will be shown on the LCD display area.
Now it is ready to reset the Auto-on time to START the
operation.
Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button, the
time increases in 30 minutes increments, up to 10
hours, then at 1 hour increments up to 24 hours.
After setting the TIMER ON ,there will be a onehalf
second delay before the remote control transmits the
signal to the air conditioner. Then, after approximately
another 2 seconds, the signal "H" will disappear and
the set temperature will re-appear on the LCD display
window.
To set the Auto-o time.
Press the TIMER OFF button. The remote control
shows TIMER OFF, the last Auto-o setting time and
the signal "H" will be shown on the LCD display area.
Now it is ready to reset the Auto-o time to START the
operation.
Push the TIMER OFF button again to set desired Auto-
o time. Each time you press the button, the time
increases in 30 minutes increments, up to 10 hours,
then at 1 hour increments up to 24 hours.
After setting the TIMER OFF ,there will be a one
and a half second delay before the remote control
transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "H" will
disappear and the set temperature will reappear on
the LCD display window.
1
1
2
2
3
3
1
2
FAN
TIMER
ON
TIMER
OFF
TEMP
SWING DIRECT
SLEEP
TURBO
LED
MODE
ON/OFF
ECO