37
Using BIOS
IDE DMA Transfer Access (Enabled)
This item allows you to enabled the transfer access of the IDE DMA.
IDE Burst Mode (Enabled)
This option, when enabled will instruct the system to send every write transaction to the
write buffer. Burstable transactions then burst onto the PCI bus and nonburstable transac-
tions do not.
OnChip PCI Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
USB Controller (Enabled)
Enables or disables the onboard USB controller. We recommend users keep the dafault value.
Disabling it might cause the USB devices not to work properly.
USB 2.0 Supports (Enabled)
This item enables or disables the onboard USB 2.0.
USB Legacy Support (Enabled)
Enable this item if you plan to use a keyboard connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
USB Mouse Support (Enabled)
Enable this item if you plan to use a mouse connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
AC97 AUDIO (Enabled)
Enables or disables the onboard AC 97 audio function. Disable this item if you are going to
install a PCI audio add-on card.
Serial ATA Controller (Enabled)
Enables or disables the onboard Serial ATA controller. Enable this item if you are to install
SATA devices onboard.
Serial ATA Mode (IDE)
Use this item to define the onboard SATA mode. Set this item to RAID if you are to activate
the RAID function of the SATA devices.
Press <Esc> to return to the Integrated Peripherals page.
USB Controller [Enabled]
USB 2.0 Supports [Enabled]
USB Legacy Support [Enabled]
USB Mouse Support [Enabled]
AC97 AUDIO [Enabled]
Serial ATA Controller [Enabled]
Serial ATA Mode [IDE]
Phoenix-AwardBIOS CMOS Setup Utility
SiS OnChip PCI Device
Item Help
Menu Level
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Press <Esc> to return to the Integrated Peripherals page.