Need help?Do you have a question about the ECS G31T-M7 and is the answer not in the manual?
General| Number of memory slots | 2 |
|---|---|
| Maximum internal memory | 4 GB |
| Processor socket | LGA 775 (Socket T) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Core 2 Duo, Intel Core 2 Quad |
| S/PDIF out connector | Yes |
| Number of COM connectors | 1 |
| Number of SATA connectors | 4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Firewire (IEEE 1394) ports | 0 |
| Audio chip | VIA VT1708B |
| Power source type | ATX |
| Audio output channels | 6.1 channels |
| Motherboard form factor | micro ATX |
| BIOS type | AMI |
| BIOS memory size | 32 Mbit |
Copyright information for the manual, including all rights reserved.
Information subject to change; manufacturer disclaims warranties.
Acknowledges registered trademarks of Microsoft and Intel.
Details FCC compliance for Class B digital devices and interference.
States device compliance with FCC Part 15 rules and conditions.
Confirms compliance with Canadian Interference-causing Equipment Regulations.
Describes the manual's structure and chapter contents.
Overview of the G31T-M7 motherboard and its key features.
Details the motherboard's components: Processor, Chipset, Memory, and Onboard LAN.
Describes optional audio, expansion slots, integrated I/O, and BIOS firmware.
Illustrates and labels the physical components on the motherboard.
Covers safety precautions, choosing a computer case, and motherboard form factor.
Instructions for physically mounting the motherboard into the computer case.
Explains how to check and set motherboard jumpers for correct system configuration.
Details connecting CPU fan, system fan, front panel connectors, and power supply.
Provides step-by-step instructions for installing the processor and its cooling fan.
Guide on installing DDR2 SDRAM modules into the DIMM slots.
Instructions for installing IDE, SATA hard drives, and CD-ROM drives.
Details on installing PCI, PCI Express x1, and PCI Express x16 add-on cards.
Information on connecting optional devices, front panel headers, and rear I/O ports.
Explains the BIOS Setup Utility, its purpose, and what it can configure.
Details how to enter setup and lists the key functions for navigation.
Instructions for downloading and installing updated BIOS versions from the manufacturer's website.
Covers basic system info and configuration of IDE/SATA devices and drives.
Details advanced system settings like thermal management, CPU features, and boot devices.
Covers settings related to DRAM frequency, VGA share memory, and HPET.
Configuration options for onboard IDE, SATA, LAN, and Audio controllers.
Configuration for ACPI suspend types, wake-up alarms, and power button behavior.
Setup for PCI/PnP devices and monitoring system hardware status.
Details on configuring smart fan control and viewing system component characteristics.
Settings for adjusting CPU clock speed, bus speed, and overclocking functions.
Covers setting passwords, loading defaults, saving, and exiting setup.
Information about the support CD-ROM, included drivers, utilities, and README files.
Instructions for auto-installing drivers and software, including setup, browse, and exit options.
Guidance on manually installing drivers and software using the CD-ROM.
Information on available utility software, licensing, and potential changes.
To Next Page
