Need help?Do you have a question about the ECS GF8100VM-M5 and is the answer not in the manual?
General| Number of memory slots | 2 |
|---|---|
| Maximum internal memory | 16 GB |
| Processor socket | Socket AM2 |
| Processor manufacturer | AMD |
| USB 2.0 connectors | 4 |
| Power fan connector | Yes |
| Number of SATA connectors | 6 |
| Controller interface type | NVIDIA MCP78V |
| PS/2 ports quantity | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Firewire (IEEE 1394) ports | 0 |
| Audio chip | VIA VT1708B |
| Power source type | ATX |
| Audio output channels | 6.1 channels |
| Motherboard form factor | micro ATX |
| BIOS type | AMI |
| Maximum graphics card memory | 512 MB |
| RAID levels | 0, 1 |
Covers copyright, disclaimer, and trademark notices for the manual.
Details the Federal Communications Commission (FCC) compliance for the device.
Introduces the motherboard and details its processor, chipset, and memory features.
Describes audio, LAN, expansion slots, I/O ports, and BIOS firmware.
Provides a visual diagram identifying key motherboard components.
Outlines safety guidelines and steps for choosing a computer case.
Explains jumper configuration, processor, and memory module installation.
Details connecting expansion cards, I/O devices, and case components to the motherboard.
Covers entering BIOS, navigation keys, and updating the BIOS.
Explains CMOS setup, advanced settings, peripherals, power management, and health status.
Details setting supervisor/user passwords and saving BIOS changes.
Describes the software CD-ROM and the auto-installation process.
Provides steps for manual driver installation and disabling UAC.
Guides on setting up RAID modes (non-bootable and bootable) in BIOS.
Details the process of installing NVIDIA RAID drivers during OS setup.
Explains Hybrid SLI features like GeForce Boost and HybridPower.
Provides requirements and steps for installing and using Hybrid SLI.
To Next Page
