ECS G43T-M User Manual

Preface
Preface
Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 2.0
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. The manufacturer reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation of the
manufacturer to notify any person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of Intel
Corporation.
Other product names used in this manual are the properties of their respective
owners and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits governing
this device. Changes or modifications not expressly approved by the system’s manu-
facturer could void the user’s authority to operate the equipment.

ECS G43T-M Specifications

General

Brand	ECS
Model	G43T-M
Category	Motherboard
Language	English

Summary

Chapter 1 Introducing the Motherboard

Motherboard Introduction

Overview of the G43T-M motherboard, its target market, and key features.

Motherboard Features and Specifications

Details on processor support, chipset, memory, audio, LAN, and I/O ports.

Motherboard Components Identification

Diagram and list identifying key components and connectors on the motherboard.

Chapter 2 Installing the Motherboard

Safety Precautions for Installation

Essential safety guidelines to prevent damage during motherboard installation.

Motherboard Installation Procedures

Steps for installing the motherboard into a computer case and connecting basic components.

Hardware Installation and Configuration

Guides on setting jumpers, installing processors, memory, and expansion cards.

System Component Connections

Connecting I/O devices, optional devices, and case components to the motherboard.

Chapter 3 Using BIOS

BIOS Setup Utility Overview

Introduction to the BIOS Setup Utility and its basic navigation and functions.

Standard CMOS Setup Configuration

Configuring basic system settings like date, time, and storage devices.

Advanced System and Component Settings

Detailed configuration of advanced options, chipset, peripherals, power, and health.

BIOS Security and Updates

Managing BIOS passwords and procedures for updating the BIOS firmware.

Chapter 4 Using the Motherboard Software

Software CD-ROM/DVD-ROM Contents

Description of drivers and utilities included on the support disc.

Software Installation Methods

Instructions for automatic and manual installation of drivers and software.

Utility Software Reference

Information on available utility software and licensing terms.

Chapter 5 Setting Up eJIFFY

eJIFFY Introduction and Setup

Overview of the eJIFFY fast boot program and its installation process.

Configuring and Using eJIFFY Features

Guides on changing language, feature icons, and common usage questions.

Chapter 6 Trouble Shooting

Troubleshooting Startup Problems

Steps to diagnose and resolve issues when the system fails to power up or display.

Maintenance and Care Tips

Recommendations for proper care and maintenance to prolong motherboard life.

Basic Troubleshooting Flowchart

A visual guide to systematically diagnose common PC startup issues.