ECS G43T-M - PC Health Status

37
Using BIOS
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
-=- System Hardware Monitor-=-
Smart Fan Function Press Enter
Shutdown Temperature Disabled
CPU Temperature : 31°C/87°F
System Temperature : 22°C/71°F
CPU FAN Speed : 3770 RPM
SYS FAN Speed : N/A
CPU Core : 1.248V
VDIMM : 1.920V
Help Item
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
PC Health Status
f
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Smart Fan Function
Help Item
CPU SMART FAN Control Disabled
Disabled
Enabled
SYS SMART FAN Control Disabled
Options
Smart Fan Function
f
Scroll to this item and press <Enter> to view the following screen:
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
These items enable you to define the CPU/System temperatur by smartly adjusting
the CPU/System fan. When it is set at certain temperature, the CPU/SYS Fan PWM
value will change accordingly.
CPU/SYS SMART FAN Control (Disabled)