EasyManuals Logo
Home>ECS>Motherboard>G31T-M7

ECS G31T-M7 User Manual

ECS G31T-M7
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
2
Introducing the Motherboard
Feature
Accommodates Intel
®
Yorkfield/Wolfdale/Core
2 Quad (Q6600/
Q6700 G0)/Pentium
®
Dual-Core/Celeron
®
4xx Series processors
Supports a system bus (FSB) of 1333/1066/800 MHz
Supports “Hyper-Threading” technology CPU
The motherboard uses an LGA775 type of Intel
®
Yorkfield/Wolfdale/Core
2
Quad (Q6600/Q6700 G0)/Pentium
®
Dual-Core/Celeron
®
4xx Series that car-
ries the following features:
Processor
The G31 Northbridge (NB) and ICH7 Southbridge (SB) chipsets are based on an
innovative and scalable architecture with proven reliability and performance.
Chipset
ICH7 (SB)
Supports DDR2 800/667 DDR SDRAM with Dual-channel architecture
Accommodates two unbuffered DIMMs
Up to 2 GB per DIMM with maximum memory size up to 4 GB
Memory
G31 (NB)
“Hyper-Threading” technology enables the operating system into thinking it’s
hooked up to two processors, allowing two threads to be run in parallel, both on
separate “logical” processors within the same physical processor.
Supports 36-bit host bus addressing, allowing the CPU
to access the entire 64 GB of the memory address
space
2 GB/s point-to-point Direct Media Interface (DMI) to
ICH7 (1 GB/s each direction)
Supports 512 Mb and 1 Gb DDR2 DRAM technologies
for x8 and x16 devices
One, 16-lane PCI Express port intended for Graphics
Attach, compatible to the PCI Express* Base Specifi-
cation revision 1.1
Onboard LAN
The onboard LAN controller provides either of the following features:
Enhanced DMA Controller, interrupt controller, and timer
functions
Compliant with PCI Express Base Specification, Revi-
sion 1.1
Compliant with PCI 2.3 specification
Integrated SATA 3.0 Gb/s Host Controller
Integrated USB 2.0 Host Controller supporting up to
eight USB 2.0 ports
Integrated IDE controller supports Ultra ATA 100/66/33
Supports 10/100 Mbps Ethernet Transceiver
Fully compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab
Wake-On-LAN(WOL) by Magic Packet/Frame/Link Change

Other manuals for ECS G31T-M7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS G31T-M7 and is the answer not in the manual?

ECS G31T-M7 Specifications

General IconGeneral
Number of memory slots2
Maximum internal memory4 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Compatible processor seriesIntel Core 2 Duo, Intel Core 2 Quad
S/PDIF out connectorYes
Number of COM connectors1
Number of SATA connectors4
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
Audio chipVIA VT1708B
Power source typeATX
Audio output channels6.1 channels
Motherboard form factormicro ATX
BIOS typeAMI
BIOS memory size32 Mbit

Related product manuals