EasyManua.ls Logo

ECS G31T-M9 User Manual

ECS G31T-M9
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Preface
Preface
Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 1.0a
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. The manufacturer reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation of the
manufacturer to notify any person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of Intel
Corporation.
Other product names used in this manual are the properties of their respective
owners and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits govern-
ing this device. Changes or modifications not expressly approved by the system’s
manufacturer could void the users authority to operate the equipment.
Question and Answer IconNeed help?

Do you have a question about the ECS G31T-M9 and is the answer not in the manual?

ECS G31T-M9 Specifications

General IconGeneral
Number of memory slots2
Maximum internal memory4 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
CPU fan connectorYes
USB 2.0 connectors1
USB 2.0 ports quantity4
Firewire (IEEE 1394) ports0
Audio chipVIA VT1708B
Power source typeATX
Audio output channels5.1 channels
Motherboard form factormicro ATX
Compatible operating systemsCore2 Duo/ Pentium Dual Core/ Celeron Dual Core/ Celeron 400
Graphics cardGMA 3100
Networking featuresFast Ethernet
ACPI version1.0
BIOS memory size32 Mbit
Weight and Dimensions IconWeight and Dimensions
Depth170 mm
Width225 mm

Summary

Introducing the Motherboard

Motherboard Components

Identification and description of key components on the motherboard.

Installing the Motherboard

Safety Precautions

Essential safety measures to follow before and during motherboard installation.

Jumper Settings Configuration

Explanation of how to set motherboard jumpers for correct system configuration.

Processor Installation

Procedure for installing the CPU onto the motherboard socket, including precautions.

Memory Module Installation

Instructions for installing DDR2 RAM modules into the motherboard's DIMM slots.

Installing Storage Devices

Guide to installing IDE and SATA storage devices onto the motherboard.

Using BIOS

Resetting CMOS Values

Procedure for loading default BIOS settings, often after hardware changes.

Loading Default BIOS Settings

Option to restore BIOS to factory default settings for stability.

Updating the BIOS

Instructions for downloading and installing a new BIOS version for improved functionality.

Using the Motherboard Software

Automatic Driver Installation

Guide to using the CD's autorun feature for driver and software installation.

Related product manuals