ECS G31T-M7 - Smart Fan and System Monitoring

38
Using BIOS
SMART Fan Control (Disabled)
This item allows you to enable/disable the control of the system fan speed by chang-
ing the fan voltage.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
SMART Fan Control Disabled
Smart Fan Function
f
Scroll to this item and press <Enter> to view the following screen:
Disabled
Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Load Default Settings
F1:General Help
: Move
Options
ECS supports the latest PECI host technology. While using Wolfdale or
Yorkfield CPU, the original images of the BIOS item “PC Health Status”
and “Smart FAN Function” will be replaced by PECI mode and negative
number. (The max data from PECI is zero.)
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
Hardware Health Event Monitoring
Smart Fan Function Press Enter
System Temperature 33°C/91°F
CPU Fan Speed: 2537 RPM
SYS FAN Speed: 0 RPM
CPU Vcore: 1.280V
VDIMM: 1.840V
-=- PECI Mode-=-
Offset to TCC Activation Temp.: -20
Help Item
f
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Load Default Settings
F1:General Help
: Move
mnlk
mnlk