ECS 965PLT-A - Page 38

32
Using BIOS
Primary Video Device (Auto)
Use this item to select which graphics controller to use as the primary boot device.
USB Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
USB2.0 (Enabled)
Use this item to enable or disable the USB 2.0 function.
USB Driver Select (Legacy USB)
Use this item to select the USB drive devices.
Press <Esc> to return to the Advanced Features page.
Press <Esc> to return to the Advanced Features page.
f
Disable this option when a
USB2.0 drive is not
available
Advanced
InsydeH20 Setup Utility
Select Boot Device
Select Screen
Select Item
Select f SubMenu
Setup Defaults
Save and Exit
Exit
+ -
< >
qr
Enter
F9 =
F10 =
ESC =
USB Configuration
USB2.0 <Enabled>
USB Driver Select <Legacy USB>
DVMT 4.0 Mode
This item allows the system to dynamically allocate the memory based on memory re-
quests. The submenu is <DVMT> and <FIXED>.