32
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
DRAM Timing Mode Auto
Surround View Disabled
Init Display First
PCI
Memory Hole Remapping Enabled
DCT Unganged Mode Always
Help Item
Auto
Limit
Manual
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Opitimized Defaults
F1: General Help
< >
Options
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Memory Hole Remapping (Enabled)
This item allows users to enable or disable memroy hole remapping.
DCT Unganged Mode (Always)
This item is used to select the DCT mode (DRAM Controller mode).
Press <Esc> to return to the main menu setting page.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
DRAM Timing Mode (Auto)
This item enables you to specify the DRAM timing mode to be configured automati-
cally or manually.
Surround View (Disabled)
ATI Surroundview function only support when using ATI PCIE graphics card.
To Next Page
Loading...
Need help?
General
