Power Management Setup Page
This page sets some of the parameters for system power management opera-
tion.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S Yes
Power Management Enabled
Suspend Time Out Disabled
Hard Disk Time Out Disabled
Resume On RTC Alarm Disabled
RTC Alarm Date 15
RTC Alarm Hour 12
RTC Alarm Minute 30
RTC Alarm Second 00
LAN/Ring Power On Disabled
Keyboard Power On Disabled
ESC : Quit ↑↓←→ : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
ACPI Aware O/S
Enable this item if you are using an O/S that supports ACPI function such as
Windows 98/ME /2000.
Power Management
Use this item to select a power management scheme. Both APM and ACPI
are supported.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time selected
passes without any system activity, the computer will enter power-saving Sus-
pend mode.
Hard Disk Time Out
This sets the timeout to power down the hard disk drive, if the time selected
passes without any hard disk activity.
Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you enable this
item, the system can automatically resume at a fixed time based on the sys-
tem’s RTC (realtime clock). Use the items below this one to set the date and
time of the wake-up alarm. You must use an ATX power supply in order to use
this feature.
LAN/Ring Power On
Your system can enter a software power down. If you enable this item, the
system can automatically resume if there is traffic on the network adapter.
Keyboard Power On
If you enable this item, you can turn the system on and off by pressing hot
keys on the keyboard. You must enable the Keyboard Power On jumper and
use an ATX power supply in order to use this feature.
28
To Next Page
Loading...
