33
LIVA One H310C USER MANUAL
Main Advanced Chipset Tweak Security Boot Exit
Enable, Disable (Enable= Def)
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
tRDRD_dg 4 0
tWRWR_dr 7 0
tWRWR_dd 7 0
tWRWR_sg 6 0
tWRWR_dg 4 0
tWRRD_dr 7 0
tWRRD_dd 7 0
tWRRD_sg 31 0
tWRRD_dg 25 0
tRDWR_dr 9 0
tRDWR_dd 10 0
tRDWR_sg 9 0
tRDWR_dg 9 0
DllBwEn [0] 0
DllBwEn [1] 1
DllBwEn [2] 2
DllBwEn [3] 2
eDRAM Mode eDRAM HW Mode
Retrain on Fast Fail Enabled
Enable RH Prevention Enabled
Exit On Failure (MRC) Enabled
MC Lock Enabled
Ch Hash Support Enabled
Strong Weak Leaker 7
Memory Scrambler Enabled
Memory Remap Enabled
Fast Boot Auto
DLL Weak Lock Support Enabled
Memory Thermal Management Disabled
DDR PowerDown and idle counter BIOS
Refresh_2x_MODE Disabled
SelfRefresh Enable Enabled
DllBwEn [0/1/2/3] (0/1/2/2)
Use these items to set the DllBwEn value.
Memory Frequency (2400)
This item shows the memory frequency.
Memory Profiles (Default Profile)
This item enables you to set the memory profiles. The selection of memory profiles
impacts memory sizing behavior.
eDRAM Mode (eDRAM HW Mode)
Use this item to select the EDRAM Mode.
Retrain on Fast Fail (Enabled)
Use this item to enable or disable the retrain on fast fail.
Enable RH Prevention (Disabled)
Use this item to enable or disable the RH prevention.
Exit On Failure (MRC) (Enabled)
Use this item to enable or disable the exit on failure (MRC).
Mc Lock (Enabled)
This item allows you to enable or disable capacity to lock MC registers or not.