12
Using BIOS
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Advanced Setup
Help Item
Disabled for Win-
dows
TM Staus TM1
Limit CPUID MaxVal Disabled
Intel XD Bit Enabled
Intel (R) HT Technology Enabled
Quick Power on Self Test Enabled
Boot Up Numlock Status On
APIC Mode Enabled
1st Boot Device Hard Drive
2nd Boot Device CD/DVD
3rd Boot Device Removable Device
Hard Disk Driver Priority Press Enter
CD&DVD Drives Press Enter
Boot Other Device Yes
TM Status (TM1)
This item shows TM function status if CPU can support TM function.
Press <Esc> to return to the Standard CMOS Setup page.
PIO Mode (Auto)
Use this item to set the PIO mode to enhance hard disk performance by optimizing
the hard disk timing.
DMA Mode (Auto)
DMA capability allows users to improve the transfer-speed and data-integrity for
compatible IDE devices.
Type (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature
is enabled, it will enhance hard disk performance by reading or writing more data
during each transfer.
f
f
: Move F10: Save and Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
mnlk
ESC:Exit Wothout Saving
Limit COUID MaxVal (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When supports Intel
AtomTM 330 Duo-Core CPUs, enables this to prevent the system from ”rebooting”
when trying to install Windows NT4.0.
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Intel (R) HT Technology (Enabled)
This item enables or disables Intel HT technology support.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
To Next Page
Loading...
Need help?
General
