ECS NFORCE4-A939 - Checking Jumper Settings; Jumper Settings

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper
Type
Description
Setting (default)
JP1
3-pin CLEAR CMOS 1-2: NORMAL
2-3: CLEAR
Before clearing the
CMOS, make sure to
turn the system off.
3-pin
JP3 BIOS PROTECT
1-2: DISABLE
2-3: ENABLE
JP1
1
JP3
1