21
Installing the Motherboard
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1 Connect the CPU cooling fan cable to CPU_FAN1.
2 Connect the system cooling fan connector to SYS_FAN1.
3 Connect the case cooling fan connector to CASE_FAN.
4 Connect the standard power supply connector to ATX_POWER.
5 Connect the auxiliary case power supply connector to ATX12V.
6 Connect the case switches and indicator LEDs to the F_PANEL.
7 Connect the case speaker cable to SPK.
24-pin power cable
With ATX v2.x power supply, users please
note that when installing 24-pin power
cable, the latches of power cable and the
ATX_POWER match perfectly.
The ATX 24-pin connector allows you to connect to ATX v2.x power
supply.
Connecting 24-pin power cable
To Next Page
Loading...
