35
Using BIOS
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Press <Esc> to return to the main menu setting page.
OnBoard SATA Mode (Enhanced)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Onboard SATA2 Controller (AHCI Mode)
Use this item to select the mode of the Onboard SATA2 Controller.
OnBoard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
To Next Page
Loading...
Need help?
General
