42
Using BIOS
M.I.B. II (MB Intelligent BiosII)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
M.I.B.II (MB Intelligent BIOS II)
Help Item
Intel(R) Core(TM) 15 CPU 661 @ 3.33GHz
Ratio Status: Unlocked (Min: 09, Max: 25)
Ratio Actual Value: 25
Current Memory Frequency : 1333MHz
Memory Current Type: 7-20-7-7-8-59-4-4-4-20
CPU Vcore : 1.152 V
VDIMM : 1.104 V
Performance Level Standard
DRAM Frequency Auto
Configure DRAM Timing by SPD Auto
Memory Hole Disabled
DRAM Command Rate Auto
CPU Over-clocking Func: Disabled
PCIE Over-clocking Func: Disabled
Spread Spectrum Enabled
Auto Detect DIMM/PCI Clk Enabled
Voltage Function Disabled
: Move F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
mnlk
Standard
Enhanced
Options
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.
Press <Esc> to return to the main menu setting page.
Shutdown Temperature (Disabled)
Enable you to set the maximum temperature the system can reach before powering
down
f
f
• System Temperature
• CPU Fan Speed
• System Fan Speed
• CPU Vcore
• VDIMM
To Next Page
Loading...
Need help?
General
