30
Using BIOS
Standard CMOS Features
This option displays basic information about your system.
Date (mm:dd:yy) Mon, Nov 17 2004
Time (hh:mm:ss) 13 : 4 : 54
f
IDE Channel 0 Master [ST380011A]
f
f
f
IDE Channel 0 Slave [None]
IDE Channel 1 Master [None]
IDE Channel 1 Slave [ATAPI 52X CDROM]
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 5 Master
Drive A [1.44M, 3.5 in.]
Video [EGA/VGA]
Halt On [All Errors]
Base Memory 640K
Extended Memory 65535K
Total Memory 1024K
Change the day, month,
year and century.
Item Help
Menu Level
f
Phoenix-AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
fIDE Devices
Your computer has two IDE channels (Primary and Secondary) and each channel can be
installed with one or two devices (Master and Slave). In addition, this motherboard supports
four SATA channels (Primary and Secondary) and each channel allows one SATA device to
be installed. Use these items to configure each device on the IDE channel.
Press <Enter> to display the IDE submenu
:
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Phoenix-AwardBIOS CMOS Setup Utility
IDE Channel 0 Master
IDE HDD Auto-Detection
Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically
detect and configure an IDE device on the IDE channel.
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
IDE HDD Auto-Detection [ Press Enter]
IDE Channel 0 Master [Auto]
Access Mode [Auto]
Capacity 80 GB
Cylinder 38309
Head 16
Precomp 0
Landing Zone 38308
Sector 255
Menu Level
f
To auto-detect the HDD’s
size, head...on this chan-
nel
f
Item Help
mnlk
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...
