20 ECTIVE AccuBox
Input and Output Connections
Anderson Plugs
The DC12V Anderson plugs (50A and 175A) on the AccuBox provide a
convenient option to connect DC12V appliances and accessories, such
as a DC fridge, TV, electric pump, lighting equipment etc.
The 50A Anderson plugs can be used as input and output outlets.
The 175A Anderson plug can be connected to an external inverter (max.
1800W) for external AC power.
Depending on your model, one the 50A Anderson plugs will each serve
as solar input
Note: Before charging or discharging via the Anderson plugs, please turn
on the Battery Main Switch. The charging current or discharging current
of an 50 A Anderson plug must be less than 50A, otherwise, the circuit
breaker will be triggered and cut off the power.
Caution!
• The circuit breaker of the 50A Anderson plug resets automatically.
Please check the connections and make sure the electrical fault in
the circuit is fixed. The circuit breaker will be triggered again if an
electrical fault still exists.
• Please avoid short circuit of any Anderson plug!
• If your device includes a MPPT solar charge controller (all models
except AccuBox X and AccuBox Xs), there is a 40A inline fuse cable
which protects the charger.
To Next Page
Loading...