ECTIVE RC
11
Warning!
Important mounting instructions!
• Do not pull the cable�
• Grasp all cables tightly during the mounting
and dismantling�
• Do not install near heat sources or in direct
sunlight�
• Avoid dust, humidity and flammable or caustic
substances near the remote control�
• Do not drop the device and avoid shocks�
• Do not place any objects on top of the device�
• Do not open the device�
• Only use dry wipes for cleaning� Switch off the
device before cleaning�
• In case of sharp-edged ducts please use an
empty conduit or cable bushing�
• Do not use the same duct for the RJ12
connection cable and power cables of other
devices�
• Only use the device if it is without any damage�
To Next Page
Loading...
