To Next PageTo Next Page
Need help?Do you have a question about the Edco BB14G and is the answer not in the manual?
Identifies different safety alert symbols (DANGER, WARNING, CAUTION) and their meanings.
Details hazards associated with gasoline/propane engines and safe operating practices.
Outlines safety precautions for electric models, including grounding and water.
Provides general instructions for operator fitness, PPE, and safe work practices.
Instructions on how to order genuine EDCO replacement parts using model and serial numbers.
Identifies and lists the controls for the BB14 Gas model with a diagram.
Identifies and lists the controls for the BB14 Electric model with a diagram.
Emphasizes wearing PPE, appropriate clothing, and keeping clear of moving parts.
Specific safety instructions for electric models, focusing on grounding and cords.
Specific safety instructions for gasoline models, covering fuel and ventilation.
Steps to take before starting the engine or electric motor, including inspections.
Detailed steps for engaging the water pump and performing wet cutting.
Steps for disengaging the water pump and performing dry cutting.
Procedures for starting the gasoline engine and electric motor.
Guidelines for cutting, avoiding strain, and keeping clear of the rotating blade.
Identifies common diamond blade problems and potential causes.
Step-by-step instructions for inspecting and replacing the saw blade.
Procedures for checking, adjusting, and replacing drive belts on gasoline and electric models.
Instructions for greasing bearings, checking engine oil, and cleaning air filters.
A table outlining maintenance tasks and their recommended frequencies.
Warning about health hazards from dust, mists, fumes, and crystalline silica.
Details the limited warranty, payment terms, freight, and return policies.
General
