Page 10
SECNG-I-1217
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
EQUIPMENT DEVELOPMENT CO., INC.
Getting Started with your New Grinder
LEVELING:
The bubble on the machine will not necessarily be
centered once optimum operating position is achived.
It will also oat back and forth during grinding. Level on
your machine may not be the same as pictured above.
ATTACH THE SKIRT:
Spacing approximately 1/8” off suface for best vacuum
performance
FINAL NOTE:
If you are using tools that have no directionality they
should be rotated occasionally for longer life and the
machine should be reasjusted as needed.
To Next Page
Loading...
