Page 9
SECNG -I-1217
E-SPTS-I-0809
800-638-3326 • edcoinc.com • techsupport@edcoinc.com
EQUIPMENT DEVELOPMENT CO., INC.
Getting Started with your New Grinder
LEVELING:
Lean back slightly on the handle to get the tools off the
surface and start the machine. Lower the machine to the
surface and do a short touch pass on the concrete.
LEVELING:
You are looking for a complete circle.
LEVELING:
If you see a partial circle repeat the leveling process until
complete circle is achived.
To Next Page
Loading...
