EasyManua.ls Logo

Edco SS-26 - Engine Maintenance Schedule; Visual Inspection & Blade Check; Arbor Shaft & Bearings; Fluid Levels & Filters

Edco SS-26
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-SS2636-DGE-I-1012
Printed in USA
TVW ©2012
Page 19
All of the above apply to Gasoline, Propane and diesel models
# Hydrostatic Transmission Reservoir - Fill with GM Dexron B or other comparable uid
Hyrdraulic Pump Reservoir - Fill with Dexron III
**# These Apply to SS26-E
Before Each
Operation
X
X
X
X
X
X
X
X
**Visual Inspection of
Entire Machine
*Check Engine Oil
*Change Engine Oil & Filter
(Sooner if necessary)
*Clean Air Filter Element
**Grease Arbor Shaft Bearings
**Inspect Belts
(Tension after the rst 4 hours
of operation, then as needed)
Tension to 70 ft. lbs. of de ection
**Inspect Blade
**Inspect Drive Chains
(Lubricate Weekly)
*Replace Fuel Filter
(None on Propane)
X
#Check Transmission & Hydraulic
Fluid Levels (Fill if necessary)
X
Follow Engine Man-
ufacturer’s Mainte-
nance Schedule
**Inspect Arbor Shaft
X
**Grease Remaining Bearings
X
As Required
Weekly
Every 40 - 50
Hours of Operation
Daily
Every 4 Hours
***Clean
Water Strainer
X
X
To order go to Discount-Equipment.com

Related product manuals