Edesa L511 - Installation Under the Kitchen Worktop

87
English
Now that you have satis-
factorily installed your
washing machine, we
recommend that you run
programme 5 at 60ºC,
without inserting any
laundry or detergent.
This is in order to check
the installation, the con-
nections and the draina-
ge system, as well as to
fully clean the inside
before running a wash
programme in the was-
hing machine.
It is possible to place
the washing machine
under the kitchen
worktop.
If you need to change
the worktop of the was-
hing machine, please
ask the Technical
Support Service, for the
guard plate and follow
these steps:
a Dismantle the work-
top of your washing
machine by loose-
ning the side screws
and lightly knocking
the worktop back-
ward in order to
extract it.
b Remove the fasteners
that hold the worktop
in place by loosening
the screws.
c Place and screw in
the guard plate on
the washing machine
in order that you may
introduce it in the
intended spot.
Select
programme 5 at 60ºC
Press the
On/ Off button
a b
c
6
INSTALATION OF THE WASHING MACHINE UNDER
THE KITCHEN WORKTOP
7
PRIOR CLEANING