37
1. Check that I’ve been plugged in and that the
electricity supply master swich is on.
2. Open the water shut-off valve.
3. Check the salt level (if necessary) and the rinse
aid level.
4. Place the dishes in the dishwasher as shown.
5. Fill the dispenser with detergent.
START-UP CHECK LIST
Before setting me to work, please read this check list carefully.
PROGRAMME SELECTION
Easy programming and control.
1
2
2
1
6 9
13
10
8
A
. Select Programme
To select a wash programme, simply turn the selector knob to the position for the
programme you want to use. When you have selected the programme, the pilot light
corresponding to this programme will light up. For easy control of the wash phases,
a pilot light (only in type A models) will also go on, indicating the current wash phase.
There is also a DISPLAY (depending on model) which shows either the estimated
duration of the programme or the time left for it to finish.
9
6
10
8
2
1
. Press the On/Off button.
The pilot light goes on.
2
1
9
6
8
15
13
14
B
14
13
9
15
8
To Next Page
Loading...
