Need help?Do you have a question about the Edge Technologies Patriot 338 and is the answer not in the manual?
User responsibility for safety devices and trained personnel for operation.
Contact information for technical assistance from Edge Technologies.
Overview of the Patriot bar feeder, its design, and operational features.
General safety guidelines including covers and lathe door interlocks.
Location, function, and testing of emergency stop buttons for the lathe and bar feeder.
Guidelines for qualified personnel performing electrical maintenance and safety procedures.
Verifying interface connections and potential need for transformers.
Steps for a typical installation, including damage inspection and required items.
Step-by-step guide for installing the bar feeder, covering checks and alignment.
Critical distance measurements to prevent machine crashes and ensure proper operation.
Details on the level pad mounting system and its components for height adjustment.
Steps for installing leveling pads, including cleaning and preparing stands.
Basic steps for performing string alignment, including precautions.
Step-by-step guide for aligning the bar feeder using a laser tool.
Advice on locking threaded rods and arbors after alignment and checking the setup.
How to operate the axial shifting option and precautions for placement.
Importance and method for setting synchronization switches to prevent crashes.
Procedure for changing the axial shift from Swiss mode to Chucker mode.
Procedure for changing the axial shift from Chucker mode to Swiss mode.
Procedure for aligning the bushing block using jack screws.
Steps for anchoring the bar feeder to the floor using wedge anchor bolts.
Steps for installing and aligning the Movable Anti-Vibration Device (MAVD).
Procedure for adjusting the magazine when changing bar diameters.
Steps for adjusting the Movable Anti-Vibration Device (MAVD) for proper operation.
How the synchronization system links the lathe headstock and bar pusher.
A checklist for essential setup steps before operating the bar feeder.
Diagram and list of functions for the handheld pendant control.
Steps for powering up the bar feeder and procedures after an alarm.
Details on low-speed advance/retreat, automatic operation, and resetting home position.
Procedure for loading new bars using the BAR ON and BAR OFF buttons.
Common issues, their causes, and solutions for bar feeder operation.
Procedure for resetting Emergency Stop Safety Interlocks (ESSI) after an unintended movement.
General| Brand | Edge Technologies |
|---|---|
| Model | Patriot 338 |
| Category | Wire Feeders |
| Language | English |
To Next Page
