To Next PageTo Next Page
Need help?Do you have a question about the Edge Amplifier and is the answer not in the manual?
Crucial safety instruction to allow the unit to acclimate to room temperature before use to prevent damage.
Describes the status indicator on the amplifier's faceplate, showing when the unit is powered on or off.
Details the location and types of fuses for speaker and AC power connections on the rear panel.
Explains the location and operation of the main power switch found on the rear panel.
Guidance on connecting speaker cables using recommended terminals for optimal performance and safety.
Instructions for connecting audio signals from the preamplifier to the amplifier's RCA inputs.
Advice on connecting the AC power cord to a grounded outlet, noting potential high-current needs.
Critical warning against unplugging RCA cables while the unit is on or immediately after shut off.
Step-by-step guide for powering on the source, preamplifier, and amplifier in the correct sequence.
Procedure for safely powering down the amplifier first, followed by other system components.
Warning about internal capacitors storing energy, requiring a 5-minute wait before unplugging.
Rules for safely connecting/disconnecting cables, including waiting periods and system disconnection.
Precautions against operating the amplifier in damp locations, exposure to fluids, or during storms.
Instructions to contact dealers for service and to only use specified fuse types and values.
General
