2
OWNERS MANUAL
WARNING
ATTENTION
Congratulations on purchasing your FLI bass enclosure. Please read this manual in order to fully
understand how to get the best results from this product and ensure that all advice on how to look
after the product is followed.
Thank you for buying FLI, we hope you enjoy listening to your product as much as we enjoyed
creating it.
During the normal use of this amplier the heatsink may become very hot.
Please do not touch during or immediately after use.
Please ensure that when installing this product the heatsink will not come into contact
with any materials that may be damaged by heat such as upholstery or plastics.
An aftermarket audio amplier will place an additional load on the vehicles charging system.
Most modern vehicles have sufcient capacity in the charging system as not all the electrical
components of the vehicle will be switched on at once.
Check the fuse rating of the amplier and use this as the peak current requirement.
Generally the continuous current draw will be a third of the peak current.
To Next Page
Loading...