This document is the owner's manual for the EdgeStar CBR902SG Built-in Beverage Cooler, providing comprehensive information on its installation, operation, maintenance, and troubleshooting.
Function Description:
The EdgeStar CBR902SG is a built-in beverage cooler designed for domestic indoor use. It is engineered to store beverages within a specific temperature range, optimized for various types of drinks. The unit features an internal fan for consistent temperature distribution and a carbon filter to protect beverages from harmful odors. It can be installed as a free-standing unit or built into cabinetry, offering flexibility in placement. The cooler includes a temperature control panel for setting the desired temperature, along with alarms for high/low temperature and an open door.
Important Technical Specifications:
- Model: CBR902SG
- Type: Built-in Beverage Cooler
- Voltage / Frequency: AC 115V~60Hz
- Amperage: 1.5 A
- Input Power: 120 W
- Color: Black Cabinet; Stainless Steel Door
- Storage Capacity: 80 Cans
- Refrigerant: R600a, 1.06 oz.
- Temperature Range: 38° F - 65° F (3°C - 18°C)
- Dimensions (Height x Width x Depth): 32" x 15" x 25 1/4" (Depth includes handle; without handle: 23 1/2")
- Weight: 83 lbs.
- Installation Clearance Requirements:
- Back: 1-2"
- Top: 1/4"
- Sides: 1/4"
- Door side against wall: at least 2 3/8" for 90-degree door swing.
- Fuse (or circuit breaker) size: 3 Amps.
- Ambient Temperature Range for Operation: 50° F to 95° F.
Usage Features:
- Temperature Control Panel: Located at the top right, it allows users to adjust the temperature in 1-degree increments using "Up" and "Down" buttons. It displays the set temperature and indicates whether the unit is in cooling mode ("RUN LIGHT").
- Temperature Memory Function: If power is lost, the previously set temperature is saved and restored once power returns.
- Internal Light: A dedicated button on the control panel allows users to turn the inner light on or off.
- Convertible Temperature Display: Users can switch between Celsius and Fahrenheit display by pressing and holding both "Up" and "Down" buttons simultaneously for approximately 3 seconds.
- Reversible Door Swing: The door can be configured to open from either the right or left side, providing adaptability to different kitchen layouts. Instructions for reversing the door swing are detailed in the manual.
- Adjustable Leveling Feet: The unit is equipped with leveling feet that can be rotated to ensure the cooler is level on uneven surfaces, crucial for proper operation.
- Shelves: The cooler includes shelves for organizing beverages, which can be installed or removed as needed.
- Lock: Some models may be equipped with a lock for security.
- Door Switch: Detects when the door is open or closed.
- Front Vent: Ensures proper ventilation for built-in installations.
Maintenance Features:
- Carbon Filter: A built-in carbon filter helps protect beverages from harmful odors. It is recommended to replace the carbon filter every 3-6 months, or every 3 months if the unit is in a kitchen environment.
- Automatic Defrost: Under most refrigerating settings and ambient conditions, the unit automatically defrosts. However, in colder settings or humid conditions, some frost may build up, potentially requiring manual defrost by powering off the unit.
- Temperature Alarm: Sounds continuously after one hour if the interior temperature is higher than 73°F (23°C) ("HI" displayed) or lower than 32°F (0°C) ("LO" displayed).
- Door Ajar Alarm: Sounds if the door remains open for more than five minutes, helping to prevent poor cooling performance and shorten the life of the refrigerator.
- Exterior Cleaning: The door and cabinet can be cleaned with a mild detergent and lukewarm water solution (e.g., 2 tablespoons of baking soda to 1 quart of water). Solvent-based or abrasive cleaners should be avoided. Stainless steel surfaces should be cleaned with a cloth dampened with a mild detergent and warm water solution, avoiding abrasive or caustic cleaning agents.
- Interior Cleaning: The interior should be cleaned occasionally by disconnecting power, removing contents and shelves, allowing the unit to defrost, wiping down the interior with a clean cloth, reinserting shelves, and reconnecting power.
- Storage Preparation: For long-term storage or moving, the unit should be defrosted, disconnected from power, and the door left open to allow air circulation and prevent odors. If children are present, precautions like removing the door are advised to prevent entrapment.
- The unit must be properly grounded using a 3-pronged outlet.
- Extension cords, adapters, and power strips should not be used.
- Always unplug the unit before cleaning or if not in use for an extended period.
- Do not operate with a damaged power cord or loose socket.
- Avoid placing hot items directly into the cooler.
- Do not install near heat sources or in areas exposed to elements like rain or snow.
- Use at least two people for moving and installation to prevent injury.
- Children should be supervised and prevented from crawling inside the cooler.
- Flammable refrigerants are used; avoid damaging refrigerant tubing to prevent leaks.
- If the unit makes strange sounds, emits smells, or smoke, unplug it immediately and contact customer service.
- Repairs should only be performed by authorized technicians.
To Next Page
General
