What does error code E3 or E4 mean on my EdgeStar CWR460DZ?
If your EdgeStar Wine Cooler displays error code “E3” or “E4”, it indicates that the defrost sensor has failed. This sensor is connected to the main control PCB in red color wires.
What to do if my EdgeStar Refrigerator does not turn on?
If your EdgeStar Refrigerator isn't turning on, there could be a few reasons. First, ensure the cooler is properly plugged into a power outlet with sufficient amperage. If it is, check for a power failure. Also, inspect your fuse box for a blown fuse or a tripped circuit breaker and replace or reset it as necessary.
Why does my EdgeStar Refrigerator turn on and off frequently?
If your EdgeStar Refrigerator turns on and off frequently, it could be due to several factors: * The room temperature might be higher than recommended, so run the cooler at the appropriate ambient temperature. * You might be opening the door too often, so minimize how often you open it. * The door might not be completely closed, so make sure it is. * The door gasket might not be sealing properly, so ensure it is sealing correctly. * The cooler might not have enough ventilation, so refer to the “Installation Clearance Requirements” section.
General| Brand | EdgeStar |
|---|---|
| Model | CWR460DZ |
| Category | Wine Cooler |
| Language | English |
To Next Page
