7
Attention:
• Avoid using the recorder with nearly
discharged battery, otherwise it may turn
off at the wrong moment.
• The higher the record's sampling rate, the
more energy is consumed by the recorder.
At the frequency of 22 kHz the consumption
is twice higher than at 8 kHz, and for the
recorders with batteries the autonomy is
down by more than three times.
• Fast switching during recording
(On → Off → On) puts the tab which is
visible in the Sound Processor program.
Thus it is possible to mark the desired
parts of records and then quickly nd them.
• Fast switching when the recorder is off
(Off → On → Off) shows battery charge
level the and free memory capacity through
ashing of LED. For this indication, see
«Start and Stop Recording.»
To Next Page
Loading...
