12
«free memory « in EMPlus and continuous
operation time in Appendix 1.
2. When conguring Daily Timer you need
to set record's start and end time. For
example «start 09:20 stop 13:05» - with
these settings the recorder starts recording
every day at 9:20 and stops recording at
13:05. Recording will be carried out as long
as the recorder has free memory, enough
charge and as long as the timer is on.
3. You can use both timers simultaneously,
but you should take into account that
timer's operation times must not overlap or
intersect.
Timer recording by can be stopped by
shifting the recorder's switch to ON, then
again to OFF position.
If timer is on, you don't have to enable recording
using switch (don't forget to synchronize the
recorder's time with the PC time).
Voice Activation System (VAS)
Voice Activation System (VAS) can signicantly
(up to 100 times if properly congured)
reduce both memory consumption and
To Next Page
Loading...
