6
Start and Stop Recording
To start recording, set the Switch to «On». The
LED ashes ve times, and the recorder starts
recording. During recording, the LED is ashing,
the number of ashes indicating battery charge
level (1 ash indicates charge of 80-100%, 2
ashes - 20-80%, 3 ashes indicate charge of
0-20%, which means the battery must be replaced
or rechargeable battery charged) and free memory
capacity: 1 ash states for 100-76%, 2 ashes -
75-51% , 3 ashes - 50-26%, 4 ashes - 25 -1%.
The interval between the rst and second series of
ashes is approximately 4 seconds, and between
the second and rst is about 8 seconds.
Note that in battery recorders the rst series of
ashes shows battery charge at the time the
recorder has been activated and is not controlled
during recording.
To stop recording, shift the Switch to «Off» position.
The LED ashes once for 10-12 seconds and the
recorder stops recording.
To Next Page
Loading...
